While we have to deal with water every single day in some form or another, it can be a nightmare for anyone who has a cell phone or a blackberry. Getting these items wet by rain or dropping them into a sink of dish water is the last thing any owner of one of these wants to do and most of the time, they think that if this happens, they have to get a completely new phone. While this is sometimes the case, it is not always true.
If you have one of the newer cell phones on the market, odds are good that if you get it wet and it stops functioning, your warranty will not cover it and you will not be able to cover up the fact that the phone was in fact damaged by water and not some other means. This is because most cell phones and small electronic devices whose warranties do not cover water damage now come equipped with small stickers on the inside of the phone’s battery compartment that trigger when they get wet. There is a powdered dye on the underside of the sticker and when it gets wet, the dye coats the sticker and changes its color. This is good for the manufacturer to keep people from claiming that there was a problem with the product originally and that it was not submerged in water. This is bad for the consumer, however, because these stickers have been known to trip and change color in areas with high amounts of humidity. This means that if you live in such an area and your phone stops working for some hardware or software-related reason, you cannot get a new phone under your warranty because they will say that the phone was water damaged, often without even doing any real looking at the phone components for signs of it.
If you do drop your phone into water, get it out as quickly as you can. Do not leave it under the water for more than 20 seconds, but if it is plugged into the AC in your house, unplug the adapter from the wall first. Wipe off the exterior, remove the battery, and place both in a bowl of uncooked rice overnight (at least) and wait until the phone is dry before you try to use it again. Try both the AC and the battery; if the battery does not work and the AC does, then you just need a new battery, which can be purchased for a small amount compared to the value of your phone.
Jim Corkern is a writer and promoter of quality
Miami Residential Water Damage Restoration Contractors and
Orlando water Damage companies.
Friday, September 28, 2007
Bathroom Vents, Mold, and Wet Laundry
A good shower or a bath can be quite relaxing, but not so much in a bathroom that is contaminated with mold on the ceilings, floor, or walls. This manifests itself is a somewhat splotchy growth on the wall and it slowly moves from one part of the bathroom to another. Leave it untreated and it will eventually go on to infest the entire bathroom. Any drywall that is contaminated must usually be completely replaced, depending on how far along the growth of the colony is. The mold will be able to seep through the entire depth of the drywall because it is a porous surface and unfortunately, all you can really do is replace it with a new piece.
Some homes these days are taking to putting carpet into the bathroom, but this is a serious mistake. No matter how careful you are, the toilet, bath tub, or sink will eventually overflow and both your carpet and padding will be completely soaked in water. If you do happen to have carpet in your bathroom and have no intentions of removing it, get ready for a mold hazard. If the carpet and padding get wet and are not completely dried as soon as possible, mold will start to grow under it. Once carpet padding gets molded, it has to be thrown away. There is nothing else you can do. The best advice is to take up the carpet and have tile installed. This creates a waterproof barrier over your wooden floor.
Leaving damp rags, towels, or clothing on the floor anywhere is a bad idea and these items need to be washed as soon as you can, since if you leave them unattended for more than 48 hours, mold can start to grow on them. Leaving them on a floor that is carpeted and then covering them up with dry clothes is even worse, since you will probably forget about the wet items and neglect to wash them. This will cause mold to grow on everything in the pile, including the carpet and padding. Clothes should be put into a hamper instead of on the floor and dry clothing should never be put on top of wet.
Keeping the humidity down in the bathroom can also be a big problem, especially if you do not have an exhaust vent installed so that steam can escape. The water vapor adheres to the ceiling and is absorbed by it, causing it to be almost continually moist. This is the perfect environment for mold to grow in and if you do not have an exhaust fan installed, this is something that you should invest in, especially if you are going to remodel the bathroom to remove the infection, anyway.
Jim Corkern is a writer and promoter of quality
mold removal in Atlanta Georgia and
Water Damage Restoration companies.
Some homes these days are taking to putting carpet into the bathroom, but this is a serious mistake. No matter how careful you are, the toilet, bath tub, or sink will eventually overflow and both your carpet and padding will be completely soaked in water. If you do happen to have carpet in your bathroom and have no intentions of removing it, get ready for a mold hazard. If the carpet and padding get wet and are not completely dried as soon as possible, mold will start to grow under it. Once carpet padding gets molded, it has to be thrown away. There is nothing else you can do. The best advice is to take up the carpet and have tile installed. This creates a waterproof barrier over your wooden floor.
Leaving damp rags, towels, or clothing on the floor anywhere is a bad idea and these items need to be washed as soon as you can, since if you leave them unattended for more than 48 hours, mold can start to grow on them. Leaving them on a floor that is carpeted and then covering them up with dry clothes is even worse, since you will probably forget about the wet items and neglect to wash them. This will cause mold to grow on everything in the pile, including the carpet and padding. Clothes should be put into a hamper instead of on the floor and dry clothing should never be put on top of wet.
Keeping the humidity down in the bathroom can also be a big problem, especially if you do not have an exhaust vent installed so that steam can escape. The water vapor adheres to the ceiling and is absorbed by it, causing it to be almost continually moist. This is the perfect environment for mold to grow in and if you do not have an exhaust fan installed, this is something that you should invest in, especially if you are going to remodel the bathroom to remove the infection, anyway.
Jim Corkern is a writer and promoter of quality
mold removal in Atlanta Georgia and
Water Damage Restoration companies.
Which Flooded Items You Can Salvage
After your home has been flooded, you might walk around it after the waters have receded and wonder to yourself just what you need to try to save and what you need to get rid of pretty quickly, since you know that contaminated items left in the home can infect everything else.
One of the first things that you need to know is that porous items, especially those that have a lot of padding, will need to be thrown away. This is because they need to be completely dried out so that mold does not start to grow in them and because these items can be difficult to disinfect, since padding makes it difficult for the disinfectant to get through the entire depth of it. This means that any bed or décor pillows will need to be thrown out, as well as any stuffed animals that you have for your children.
It will also be very hard to save upholstered furniture. The dirt, silt, and chemicals often found in flood waters will get past the outer fabric fairly easily if the item is in the water for more than a couple of hours and the padding inside will soak up quite a bit of it.
Saving your curtains and other fabric items that are exposed like this depends on how much damage was done to them. The dyes in the fabric may have bled or it may have become stained from being left in the water for so long.
Items like table cloths and towels can be saved if they are washed a few times in enough disinfectant, but even items that have not come into contact with the flood water can become molded after a few days if they are left in the house, due to the high humidity.
Any electric blankets that you may have that were exposed to the flood water will need to be completely thrown away. These items could possibly have wiring damage and can malfunction if you try to use them. They are in no way safe to continue using after being submerged in water.
Blankets can be washed, but you will need to do this a few times in hot water. Chlorine bleach can sanitize these items, but you will need to be careful what you use it on, since the dyes may run on some items. Try to find a laundry detergent that disinfects, as well. Borax detergent can be helpful in killing mold.
Wooden items that have had their finishes breached by flood waters may be contaminated and will need to be disinfected thoroughly.
Jim Corkern is a writer and promoter of quality
Water Damage Miami and
water damage restoration in atlanta companies.
One of the first things that you need to know is that porous items, especially those that have a lot of padding, will need to be thrown away. This is because they need to be completely dried out so that mold does not start to grow in them and because these items can be difficult to disinfect, since padding makes it difficult for the disinfectant to get through the entire depth of it. This means that any bed or décor pillows will need to be thrown out, as well as any stuffed animals that you have for your children.
It will also be very hard to save upholstered furniture. The dirt, silt, and chemicals often found in flood waters will get past the outer fabric fairly easily if the item is in the water for more than a couple of hours and the padding inside will soak up quite a bit of it.
Saving your curtains and other fabric items that are exposed like this depends on how much damage was done to them. The dyes in the fabric may have bled or it may have become stained from being left in the water for so long.
Items like table cloths and towels can be saved if they are washed a few times in enough disinfectant, but even items that have not come into contact with the flood water can become molded after a few days if they are left in the house, due to the high humidity.
Any electric blankets that you may have that were exposed to the flood water will need to be completely thrown away. These items could possibly have wiring damage and can malfunction if you try to use them. They are in no way safe to continue using after being submerged in water.
Blankets can be washed, but you will need to do this a few times in hot water. Chlorine bleach can sanitize these items, but you will need to be careful what you use it on, since the dyes may run on some items. Try to find a laundry detergent that disinfects, as well. Borax detergent can be helpful in killing mold.
Wooden items that have had their finishes breached by flood waters may be contaminated and will need to be disinfected thoroughly.
Jim Corkern is a writer and promoter of quality
Water Damage Miami and
water damage restoration in atlanta companies.
Which Flooded Items Can I Save?
You may not be very sure what you can save after a flood wreaks havoc on the interior and exterior of your home, but there are some definite things that you can save and things that you will have to throw away.
Certain items that have been soaked in dirty flood water for many hours will probably not be salvageable. Wooden shutters, aluminum, wooden blinds, things made of vinyl, and etcetera can usually not be saved. Metal items will corrode and wooden items tend to warp over time, since it is porous and soaks up water easily.
Any pillows that were in the flood water need to be thrown out, since it will be hard to get rid of all the dirt from the material. It will also be difficult to completely disinfect them.
When you purchase a disinfectant, you should make sure that it is approved by the EPA and that it has a registration number somewhere on the label. This will assure you that the cleaner meets the EPA’s requirements. Having the correct disinfectant for the task at hand is also important. Some disinfectants are only effective on hard surfaces.
Before you begin washing your clothing and other fabrics, you should make sure that the water is safe to use and it not contaminated. If the tap water is safe to drink, it is safe to wash your clothes in. You also might want to make an effort to sanitize your washing machine before you use it. You can do this by running some detergent and bleach through the washer using the most water it can handle.
You can use a water hose to get rid of mud and dirt that is still on the floors of your home and on the furniture. Dried mud and dirt can be scraped and shaken off of most textiles.
When you are dealing with water damaged furniture, you have only a few options. If flood water reached the fabric, it may be stained and if they were in the water for more than a few hours, the silt and dirt that was in the water probably got through both the fabric and the padding. Unfortunately, padding will retain water and allow mold to grow. The majority of the time, your best bet will be to simply discard the upholstered furniture altogether. Restoring this furniture will mean stripping everything down to the frame.
If water gets through the finish on some wood items, it will mildew and the joints in the wooden frame of the item may also become loose.
Mattresses or box springs can be saved if they have come into contact with only a minimum of clean flood water (such as broken water pipes), but mattresses that have been come into contact with dirty flood waters cannot be due to the biological and chemical hazards that exist in them. You should not use a mattress that has a musty odor after it dries, since this means that mold is present. Have this item sanitized by a professional.
Jim Corkern is a writer and promoter of quality
Los Angeles water damage and restoration services and Denver water damage restoration companies.
Certain items that have been soaked in dirty flood water for many hours will probably not be salvageable. Wooden shutters, aluminum, wooden blinds, things made of vinyl, and etcetera can usually not be saved. Metal items will corrode and wooden items tend to warp over time, since it is porous and soaks up water easily.
Any pillows that were in the flood water need to be thrown out, since it will be hard to get rid of all the dirt from the material. It will also be difficult to completely disinfect them.
When you purchase a disinfectant, you should make sure that it is approved by the EPA and that it has a registration number somewhere on the label. This will assure you that the cleaner meets the EPA’s requirements. Having the correct disinfectant for the task at hand is also important. Some disinfectants are only effective on hard surfaces.
Before you begin washing your clothing and other fabrics, you should make sure that the water is safe to use and it not contaminated. If the tap water is safe to drink, it is safe to wash your clothes in. You also might want to make an effort to sanitize your washing machine before you use it. You can do this by running some detergent and bleach through the washer using the most water it can handle.
You can use a water hose to get rid of mud and dirt that is still on the floors of your home and on the furniture. Dried mud and dirt can be scraped and shaken off of most textiles.
When you are dealing with water damaged furniture, you have only a few options. If flood water reached the fabric, it may be stained and if they were in the water for more than a few hours, the silt and dirt that was in the water probably got through both the fabric and the padding. Unfortunately, padding will retain water and allow mold to grow. The majority of the time, your best bet will be to simply discard the upholstered furniture altogether. Restoring this furniture will mean stripping everything down to the frame.
If water gets through the finish on some wood items, it will mildew and the joints in the wooden frame of the item may also become loose.
Mattresses or box springs can be saved if they have come into contact with only a minimum of clean flood water (such as broken water pipes), but mattresses that have been come into contact with dirty flood waters cannot be due to the biological and chemical hazards that exist in them. You should not use a mattress that has a musty odor after it dries, since this means that mold is present. Have this item sanitized by a professional.
Jim Corkern is a writer and promoter of quality
Los Angeles water damage and restoration services and Denver water damage restoration companies.
Thursday, September 13, 2007
Moldy Fabric Cleaning Methods
There is hardly a person in the world that hasn’t gone through their wardrobe and discovered that one favorite shirt of theirs from their younger days. And then the moment is ruined upon the discovery of a fuzzy substance on the shirt. If you found this shirt in the back of your closet, then you should go wash your hands, because the shirt has been infected with mold and touching mold spores with your bare hands can be very hazardous for your health. There are several medical problems that could arise from contact with mold. Some of these problems are skin rashes, allergic reactions, runny noses, and the like.
If you do have articles of clothing which contain mold, don’t worry because most molded clothing can be cleaned as good as new. However, the mold can end up leaving stains. Bleach can be a very effective form of mold removal. However, this usually works best when cleaning white clothing. Other effective cleaning methods include using a scrub brush, which can remove a good deal of the mold and then place a pre-wash spray on it. Allow this spray to soak for roughly forty five minutes and then put it into the washing machine. It is very important that you allow these clothes to dry naturally in the sun. If you were to use some artificial source of heat, then the stain could set in even deeper in the fabric, and the sun can help further the bleaching process white clothing.
While regular clothing is easy to have mold removed from, you may have no such luck with genuine leather or cowhide. These types of items are easily susceptible to being discolored beyond repair. Most of these items are incapable of being restored, and they are probably better left in the garbage.
However, upholstery and curtains that have come in contact with mold can be cleaned using the same aforementioned methods as described above. It is important that you also purchase a vacuum cleaner that has a HEPA filter in it in order to accommodate a mold free home. If you use this vacuum and its brush attachments to gather up all of the mold and its consequential spores, the filter will prevent these spores from being re-released. This will prevent from having to repeat this process or, perhaps even worse, have to throw out more clothing.
Jim Corkern is a writer and promoter of quality
Water Damage Restoration Contractors and
Miami water Damage companies.
If you do have articles of clothing which contain mold, don’t worry because most molded clothing can be cleaned as good as new. However, the mold can end up leaving stains. Bleach can be a very effective form of mold removal. However, this usually works best when cleaning white clothing. Other effective cleaning methods include using a scrub brush, which can remove a good deal of the mold and then place a pre-wash spray on it. Allow this spray to soak for roughly forty five minutes and then put it into the washing machine. It is very important that you allow these clothes to dry naturally in the sun. If you were to use some artificial source of heat, then the stain could set in even deeper in the fabric, and the sun can help further the bleaching process white clothing.
While regular clothing is easy to have mold removed from, you may have no such luck with genuine leather or cowhide. These types of items are easily susceptible to being discolored beyond repair. Most of these items are incapable of being restored, and they are probably better left in the garbage.
However, upholstery and curtains that have come in contact with mold can be cleaned using the same aforementioned methods as described above. It is important that you also purchase a vacuum cleaner that has a HEPA filter in it in order to accommodate a mold free home. If you use this vacuum and its brush attachments to gather up all of the mold and its consequential spores, the filter will prevent these spores from being re-released. This will prevent from having to repeat this process or, perhaps even worse, have to throw out more clothing.
Jim Corkern is a writer and promoter of quality
Water Damage Restoration Contractors and
Miami water Damage companies.
Mold and your Citrus Crops
Anyone who works with citrus crops knows that they can take a very long time to grow and cultivate. But, perhaps even more frustrating than waiting on the crops to have to grow and ripen are the various molds and fungi that could afflict the crops. The two most prominent molds that affect a citrus crop post-harvest are blue mold, and green mold. These two are caused by the single mold Penicillium digitatum. All citrus fruit growing regions have this mold and it is most certainly a serious threat to the crops.
Citrus fruit is made into an easy target for mold by way of being bruised or by being punctured while it is being packed or harvested. The mold is attracted to the juice that comes out of the damaged fruit on account of the fact that mold likes to grow in wet and humid environments. And since most citrus is grown in temperate zones, there is no lack of these two qualities. If the fruit is in, say, a large shipping truck with a lot of other fruits, the mold could spread far into the shipment and cause a good portion of it to be riddled with mold infection. And if the mold makes to the grocery store and the mold, by some miracle, goes unnoticed it could affect other items in the store. If the fruit is left on the tree and mold has spread to it then other fruit on the tree could be affected and the crop could be rendered useless.
The only actual difference between blue mold and green mold is color. There are virtually no differences in the effects the two molds have on fruit. The two molds also have very similar growing environments and necessities and have basically the same needs. They must both grow in a temperature of around seventy five degrees Fahrenheit. Raising or lowering the temperature can slow the growth of these molds. As such, freezing the citrus fruits can stop the molds growth before any serious damage can be done. This is why most shipment trucks are equipped with a freezer, but many still do not have this feature. Taking extra care of the citrus fruits is another way to prevent the spread of mold. Caring for the fruit helps to ensure that there is no puncturing or bruising. Fungicides are also a very popular, and a highly recommended, way of dealing with mold.
Jim Corkern is a writer and promoter of quality
Texas Residential Water Damage Restoration Contractors and
Water Damage Restoration companies across the united states.
Citrus fruit is made into an easy target for mold by way of being bruised or by being punctured while it is being packed or harvested. The mold is attracted to the juice that comes out of the damaged fruit on account of the fact that mold likes to grow in wet and humid environments. And since most citrus is grown in temperate zones, there is no lack of these two qualities. If the fruit is in, say, a large shipping truck with a lot of other fruits, the mold could spread far into the shipment and cause a good portion of it to be riddled with mold infection. And if the mold makes to the grocery store and the mold, by some miracle, goes unnoticed it could affect other items in the store. If the fruit is left on the tree and mold has spread to it then other fruit on the tree could be affected and the crop could be rendered useless.
The only actual difference between blue mold and green mold is color. There are virtually no differences in the effects the two molds have on fruit. The two molds also have very similar growing environments and necessities and have basically the same needs. They must both grow in a temperature of around seventy five degrees Fahrenheit. Raising or lowering the temperature can slow the growth of these molds. As such, freezing the citrus fruits can stop the molds growth before any serious damage can be done. This is why most shipment trucks are equipped with a freezer, but many still do not have this feature. Taking extra care of the citrus fruits is another way to prevent the spread of mold. Caring for the fruit helps to ensure that there is no puncturing or bruising. Fungicides are also a very popular, and a highly recommended, way of dealing with mold.
Jim Corkern is a writer and promoter of quality
Texas Residential Water Damage Restoration Contractors and
Water Damage Restoration companies across the united states.
Hurricanes and Water Safety
If there is a hurricane heading to your area, then it is most important that you make preparations, incase you decide to simply wait the hurricane out. Arguably the most important thing that you can do is to make sure that you have a sizeable bottled water supply in your home. It is important that you make sure that the water supply is proportionate to the number of people dwelling at your house, as there must be enough water for the duration of the storm. It is critical that you have clean drinking water during the storm. The water from the sea and sewer system may have affected the water in your tap, so you should never assume that the water coming out of your faucet is clean. You should not drink anything but bottled water during a hurricane. This contaminated water could sicken your family or guests and even cause death in the worst case. You should make sure that there is at least one gallon of water for one person to drink a day. Water purification tablets and chlorinated bleach come highly recommended, as they can be used to clean water in most situations. It is important that you let the treated water set for at least 30 minutes before you drink it.
It is important that you, under no circumstances whatsoever, do not drink water that may be contaminated. Damage to your body caused by contaminated water is devastating and if you have drank any contaminated water and are afflicted with the symptoms of it, it is very unlikely that you will be able to make it to a hospital during the hurricane and death could very well result. If you receive any cuts or wounds, do not try and wash it off with faucet water. This could make the contamination’s job that much easier. You should instead wash the cut or cuts with soap and chlorine bleach treated water. This will help keep serious harm from happening.
You should at no point allow children to play in flood waters, no matter how hot it may get in your building. If there are toys that have come into contact with water that you so much as suspect as being contaminated, you should have the toys disinfected before allowing the children to play with them again. You should also board up your windows and doors with plywood, as it keeps glass from being blown into your home and causing cuts.
Jim Corkern is a writer and promoter of quality
Miami Residential Water Damage Restoration Contractors and
Orlando water Damage companies.
It is important that you, under no circumstances whatsoever, do not drink water that may be contaminated. Damage to your body caused by contaminated water is devastating and if you have drank any contaminated water and are afflicted with the symptoms of it, it is very unlikely that you will be able to make it to a hospital during the hurricane and death could very well result. If you receive any cuts or wounds, do not try and wash it off with faucet water. This could make the contamination’s job that much easier. You should instead wash the cut or cuts with soap and chlorine bleach treated water. This will help keep serious harm from happening.
You should at no point allow children to play in flood waters, no matter how hot it may get in your building. If there are toys that have come into contact with water that you so much as suspect as being contaminated, you should have the toys disinfected before allowing the children to play with them again. You should also board up your windows and doors with plywood, as it keeps glass from being blown into your home and causing cuts.
Jim Corkern is a writer and promoter of quality
Miami Residential Water Damage Restoration Contractors and
Orlando water Damage companies.
How to Waterproof Your Deck
One thing that always makes a homeowner proud is a newly finished deck. And for a few months it may look very good. However, if you have not had your deck waterproofed, your deck could end up being a very ugly addition to your home. If you want your deck to be around for a long time, then waterproofing it is absolutely essential. Without waterproofing, than cracking and warping can occur, and that means your deck will not be very far from destruction. Fortunately, waterproofing doesn’t have to be very difficult.
The very first thing to do to waterproof your deck is to give it a very thorough cleaning. Now, usually the best time for one to start waterproofing the deck is to start right after you build the deck. However, cleaning it off is the first thing to do if you do not have the option of starting right away. You should start the cleaning process is to sweep off any and all debris that may be on the deck. Then remove any furniture that may be on the deck. Once all of the debris and furniture is removed, you can go to your local hardware store and purchase a cleaning solution. You can employ the use of a pump sprayer to apply the cleaning agent to the deck. It will eventually start to foam, and at that point you should start to scrub the deck with a scrub brush that has stiff bristles. The bristles will give a little extra muscle to remove any stubborn stains that may be left on there, especially ones from soot or grease. After scrubbing, rinse the deck off as thoroughly as possible with a garden hose. It’s a good idea to wear eye protection of some kind in order to keep any grit from the deck out of your eyes.
Now, after the deck has had time to dry, there are two options available. If the wood is more or less new, you have the option to put a new stain on it. If you do not want a new stain, then now is the time to apply water sealant onto the deck in order to protect the wood. Applying the sealant is best done with a sprayer or roller. The deck should dry completely after a few days, and then it should be alright to walk on it without worrying about damaging any of the sealant.
Jim Corkern is a writer and promoter of quality
Houston Fire Damage Water Restoration Contractor companies and
Los Angeles Water Damage and Restoration Services.
The very first thing to do to waterproof your deck is to give it a very thorough cleaning. Now, usually the best time for one to start waterproofing the deck is to start right after you build the deck. However, cleaning it off is the first thing to do if you do not have the option of starting right away. You should start the cleaning process is to sweep off any and all debris that may be on the deck. Then remove any furniture that may be on the deck. Once all of the debris and furniture is removed, you can go to your local hardware store and purchase a cleaning solution. You can employ the use of a pump sprayer to apply the cleaning agent to the deck. It will eventually start to foam, and at that point you should start to scrub the deck with a scrub brush that has stiff bristles. The bristles will give a little extra muscle to remove any stubborn stains that may be left on there, especially ones from soot or grease. After scrubbing, rinse the deck off as thoroughly as possible with a garden hose. It’s a good idea to wear eye protection of some kind in order to keep any grit from the deck out of your eyes.
Now, after the deck has had time to dry, there are two options available. If the wood is more or less new, you have the option to put a new stain on it. If you do not want a new stain, then now is the time to apply water sealant onto the deck in order to protect the wood. Applying the sealant is best done with a sprayer or roller. The deck should dry completely after a few days, and then it should be alright to walk on it without worrying about damaging any of the sealant.
Jim Corkern is a writer and promoter of quality
Houston Fire Damage Water Restoration Contractor companies and
Los Angeles Water Damage and Restoration Services.
Fire Damage Restoration Advice
One of the most devastating things can happen to a home owner is to have a house fire. And once the embers are finally smoldered out, the first thing one usually wants to do is to go into the charred remains to see just what are you home can be salvaged and cleaned. However, you should hold off on doing this until you have sought council from your insurance claims adjuster. This way, you can make sure that you do not waste your time, and money, and cause more damage as opposed to repairs. Your insurance adjuster can give guidance on how best to restore and/or replace your destroyed or damaged belongings.
One helpful thing that an insurance claims adjuster can do is refer you to a fire restoration company. Companies such as these can give very helpful tips to prevent further damage from being done to your home and property. Fire restoration companies can even tell you how to restore damaged properties. They will also give you an estimate of the likely price of thoroughly cleaning and deodorizing your home. Even though these services are, more often than not, expensive, it will most likely be a lot less than having to replace your damaged floors and furniture.
Now, if you find that you are incapable of affording the services a fire restoration company can offer, there are certain measures that you can take on your own. However, be sure that your fire marshal approves your plan and deems it safe enough for you to do before you go back into your home.
It is important that the very first thing you do to repair your home is to get as much air circulating through it as possible. The easiest way of doing this is to simply open some doors and open some windows and bring in a fan. If there has been any water damage, perhaps as a result of the fire trucks, you will probably want to invest in a de-humidifier. Any wet items should be dried as soon as possible. You might also want to consider buying a heavy duty vacuum cleaner. If you cannot afford cleaning services, do not use an upright vacuum or attachments because this would only set soot damage further in the carpet. After the vacuuming is done, you should cover the carpet with a tarp, so you do not cause further soiling while cleaning.
Jim Corkern is a writer and promoter of quality
water damage restoration companies and
Dallas Residential Water Damage Restoration Contractors.
One helpful thing that an insurance claims adjuster can do is refer you to a fire restoration company. Companies such as these can give very helpful tips to prevent further damage from being done to your home and property. Fire restoration companies can even tell you how to restore damaged properties. They will also give you an estimate of the likely price of thoroughly cleaning and deodorizing your home. Even though these services are, more often than not, expensive, it will most likely be a lot less than having to replace your damaged floors and furniture.
Now, if you find that you are incapable of affording the services a fire restoration company can offer, there are certain measures that you can take on your own. However, be sure that your fire marshal approves your plan and deems it safe enough for you to do before you go back into your home.
It is important that the very first thing you do to repair your home is to get as much air circulating through it as possible. The easiest way of doing this is to simply open some doors and open some windows and bring in a fan. If there has been any water damage, perhaps as a result of the fire trucks, you will probably want to invest in a de-humidifier. Any wet items should be dried as soon as possible. You might also want to consider buying a heavy duty vacuum cleaner. If you cannot afford cleaning services, do not use an upright vacuum or attachments because this would only set soot damage further in the carpet. After the vacuuming is done, you should cover the carpet with a tarp, so you do not cause further soiling while cleaning.
Jim Corkern is a writer and promoter of quality
water damage restoration companies and
Dallas Residential Water Damage Restoration Contractors.
Subscribe to:
Posts (Atom)
